P/N 3141959_C
1-3
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
FNGSC-A Self Contained Merchandisers
SHIPPING SKID
Each merchandiser is shipped on a skid to
protect the merchandiser’s base, and to make
positioning the case easier .
Remove the top of the crate and detach walls
from each other (if provided) . Lift crate from
the skid . Unscrew the case from the skid . The
fixture can now be lifted off the crate skid .
Lift
only at base of skid!
Remove any braces and/or
skids attached (blanket wrapped merchandiser
may have skids) .
DO NOT LAY MERCHANDISER OVER
ON THE FLOOR TO REMOVE SKID .
Once the skid is removed, the merchandiser
must be lifted —NOT PUSHED— to reposition .
To remove the skid, remove screws attaching
skid to the merchandiser .
Check floor where cases are to be set to see if
it is a level area . Determine the highest part of
the floor .
MERCHANDISER LEVELING
B
E
SURE
TO
POSITION
MERCHANDISERS
PROPERLY
.
Level the merchandiser by all four
corners . Merchandiser(s) must be installed
level to ensure proper operation of the
refrigeration system and to ensure proper
drainage of defrost water .
Do NOT stand or walk on top of
merchandiser. Do not store items or
flammable materials atop the unit.
Do NOT remove shipping skid until
the merchandiser is positioned for
installation.
Remove #7 x 2” Philips screws
from merchandiser base
