Husqvarna Tuff Torq K61, Руководство по обслуживанию

Страница: 22 / 48

19
Tuff Torq K61 Hydrostatic Transaxle
Fig. 5, Brake Shaft & Return Spring Assembly
Fig. 6, Brake Shaft & Return Spring Assembly
Fig. 7, Brake Shaft—Bypass Rod Assembly
Interlock Linkage (If Applicable)
1. Place the Upper Case back to the Service Position; then,
attach the Bypass Rod to the Bypass Shaft. (Fig. 3)
Fig. 3, Bypass Rod Assembly
Brake Shaft Assembly (If Applicable)
1. Install a new O-ring onto the Brake Shaft.
(Fig. 4)
2. Check Bushing for damage or exceptionable wear;
replace if necessary.
(Fig. 4)
Fig. 4, Brake Shaft Assembly
Apply a light coating of grease to the surface
of the new O-ring and Bushing. Also, apply a small
amount of grease into mating hole of the Upper Case.
3. Align the Bypass Rod with the slot on the Brake Shaft.
(Fig. 5, 7)
4. Place the Brake Return Spring under the Brake Shaft.
(Fig. 5, 7)
5. Hook the Brake Return Spring to the Brake Shaft (see
arrow
➊
); then, hook the opposite end of the spring to
the Upper Case housing (see arrow
➋
). (Fig. 6)