Husqvarna TS 355 B, Руководство оператора

Страница: 15 / 29

WARNING!
Before starting up machine make sure you
completely read these instructions. Be familiar
with operation of the machine before operation!
Use:
Wet or Dry sawing of masonry and refractory materials
such as brick and block, as shown in American National
Standard Institute, B7.1-2000 "SAFETY REQUIRE -
MENTS FOR THE USE, CARE & PROTECTION OF
ABRASIVE WHEELS" (ANSI B7.1-2000). This machine
is designed for use as a Masonry Saw, and conforms to
ANSI B7.1-2000. All other applications are prohibited.
Not for use with material shapes that are unstable on a
flat surface, such as rocks, natural stone, or man-made
material of irregular shape.
Tools:
Diamond blades — dry or water cooled.
Reinforced Abrasive blades — dry cutting only.
Sizes:
Ø: 12" (300 mm), 14" (356 mm), 18" (450 mm),
and 20" (500 mm) with Arbor Ø 1" (25.4 mm).
For information contact your Dealer, and obtain a
copy of ANSI B7.1-2000.
OPERATION
WARNING!
Use ONLY REINFORCED Abrasive Blades or Diamond
Blades with this machine.
Use ONLY blades marked with a maximum operating
speed greater than the blade shaft speed.
DO NOT use carbide tipped, wood cutting, or circular
saw blades with this machine.
Conventional “Wet” diamond blades MUST be used with
water.
DO NOT use Abrasive Blades WITH water!
Description:
dry, masonry saw. It is engineered as a 14” dry saw,
consisting of a powerful 115v motor in a hard plastic
case. The saw is capable of cutting brick and
masonry up to 8” x 8” x16” in size; the blade has a
5” cutting depth.
The TS 355B is a versatile lightweight,
Depth of Cut (Maximum):
5.00" (127 mm) with Ø 14" (356 mm) blade.
Maximum Material Size:
8" x 8" x 16" (20.3 x 20.3 x 40.6 cm) block.
Nominal Weight: See “Specifications”.
Operating Weight: See “Specifications”.
Dimensions: See “Specifications”.
Blade Guard Capacity: See "Tools" above.
Masonry Types:
including cinder block, slump stone block, wall brick,
paver brick, concrete block and cylinders, roofing
tile, marble, granite, decorative rock or almost any
other non-ferrous material.
Can cut a variety of masonry types
NOTICE
This machine is not designed to cut plastic or ferrous
(metal) material.
Features:
Head to allow for easier step cutting. The Cutting
Head can be locked in a down position when cutting
smaller pieces. This machine also has a lockable
trigger-operating switch in the handle. For extended
operating life, this machine is designed with a clean
motor air filter and replaceable motor brushes.
Designed with a spring-assisted Cutting
The operator must
wear protective clothing
appropriate to the work
he is doing.
14