Husqvarna TC 125, Руководство пользователя

Страница: 74 / 163

11 SERVICE WORK ON THE CHASSIS
72
11.28 Removing the main silencer
Warning
Danger of burns
The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
Preparatory work
–
Remove the right side cover. ( p. 73)
K00887-10
Main work
–
Remove screws
1
with the washers.
–
Pull off the main silencer from the manifold at rubber
sleeve
2
.
11.29 Installing the main silencer
K00888-10
Main work
–
Position the main silencer with rubber sleeve
1
.
–
Mount and tighten screws 2 with the washers.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
Finishing work
–
Install the right side cover. ( p. 74)
11.30 Changing the glass fiber yarn filling in the main silencer
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
Info
Over time, the fibers of the glass fiber yarn escape and the damper "burns" out.
Not only is the noise level higher, the performance characteristic changes.
Preparatory work
–
Remove the right side cover. ( p. 73)
–
Remove the main silencer. ( p. 72)