English
– 15
TECHNICAL DATA
Blade
Recommended blade speed
When sawing at 800-900 rpm, a higher sawing output is obtained if gear 1 is used.
Follow the blade manufacture´s recommendations regarding material and blade speed when choosing blade. When cutting in hard
concrete, a lower speed or a more shallow cut is required compared to cutting in soft concrete.
EC-declaration of conformity
(Applies to Europe only)
Husqvarna AB
, SE-433 81 Gothenburg, Sweden, tel: +46-31-949000, declares under sole responsibility that the power unit
Husqvarna PP 480 HF
from 2010´s serial numbers and onwards (the year is clearly stated in plain text on the type plate with
subsequent serial number) is in conformity with the requirements of the COUNCIL’S DIRECTIVES:
•
of May 17, 2006 "relating to machinery"
2006/42/EC
•
of December 15, 2004 ”relating to electromagnetic compatibility”
2004/108/EC
.
•
of December 12, 2006 ”relating to electrical equipment”
2006/95/EC
.
The following standards have been applied: EN ISO 12100:2003, EN 55014-1:2006, EN 55014-2/A1:2001, EN 61000-3-11:2000,
EN 60204-1:2006.
Göteborg December 29, 2009
Henric Andersson
Vice President, Head of Power Cutters and Construction Equipment
Husqvarna AB
(Authorized representative for Husqvarna AB and responsible for technical documentation.)
!
WARNING! Cutting at too high revs can
cause damage to the blade and lead to
personal injury.
Speed, rpm
Gear 1
600-900
Gear 2
800-1200
600 mm (24”)
800 mm (32”)
1000 mm (40”)
1200 mm (48”)
1600 mm (63”)
600 rpm
700 rpm
800 rpm
900 rpm
1000 rpm
1100 rpm
1200 rpm
Concrete
Hard
Medium
Soft
