Husqvarna K3000 EL, Руководство оператора

Страница: 5 / 20

English
– 5
K3000 SPRA Y
A
C
B
A. Fill the w ater tank with clean water and tighten the tank
cap. If there is a risk of the water freezing, mix windscreen
washer fluid in the water tank.
B. Connect the machine's plug in the electronics box on the
harness.
C. Connect the plug on the electronics box to an earthed
socket.
!
W ARNING! The plug on the power cutter
should be connected to the distribution box
on the harness and never directly into a live
wall socket or extension cable.
The cable from the electronic box on the
harness should be plugged into an earthed,
electrical outlet socket, never do this with
wet hands.
!
W ARNING! Always make sure that there is
water in the water tank. The pump must not
be run without water as this will destroy it. If
you want to cut dry connect K3000 El
directly to the wall socket.