Husqvarna FE 450 2018, Руководство пользователя

Страница: 87 / 164

12 SERVICE WORK ON THE CHASSIS
85
M01469-10
Main work
–
Check throttle cable routing.
Both throttle cables must be routed, side by side, on
the back of the handlebars and above the fuel tank
bracket, to the throttle valve body. Both throttle cables
must be secured behind the fuel tank contact area rub-
ber band.
» If the throttle cable routing is not as specified:
–
Correct throttle cable routing.
Finishing work
–
Install the fuel tank. ( p. 77)
–
Mount the seat. ( p. 68)
–
Install the air filter box cover. ( p. 69)
12.42 Checking the rubber grip
401197-01
–
Check the rubber grips on the handlebar for damage, wear,
and looseness.
Info
The rubber grips are vulcanized onto a sleeve on the
left and onto the handle tube of the throttle grip on the
right. The left sleeve is clamped onto the handlebar.
The rubber grip can only be replaced with the sleeve
or the throttle tube.
» If a rubber grip is damaged, worn, or loose:
–
Change the rubber grip.
K00608-10
–
Check that screw
1
is firmly seated.
Guideline
Screw, fixed
grip M4 5 Nm (3.7 lbf ft)
Loctite
®
243™
Diamond
A
must be located at the top.