Husqvarna FE 450 2018, Руководство пользователя

Страница: 35 / 164

8 PREPARING FOR USE
33
(60 °F), then the battery is not faulty, but needs to be warmed up
internally to increase its starting power (current output).
The starting power increases as the battery warms up.
8.4 Preparing the vehicle for difficult riding conditions
Info
Use of the vehicle under difficult conditions, such as on sand or on wet and muddy surfaces, can lead
to considerably more rapid wear of components such as the drive train, brake system, or suspension
components. For this reason, it may be necessary to inspect or replace parts before the next scheduled
service.
–
Clean the air filter and air filter box. ( p. 70)
Info
Check the air filter approx. every 30 minutes.
–
Seal the air filter box. ( p. 71)
–
Check the connector for humidity and corrosion and to ensure it is firmly seated.
» If humidity, corrosion, or damage is found:
–
Clean and dry the connector, or change it if necessary.
Difficult riding conditions are:
–
Rides on dry sand. ( p. 33)
–
Rides on wet sand. ( p. 34)
–
Rides on wet and muddy circuits. ( p. 35)
–
Rides at high temperature and slow speed. ( p. 35)
–
Rides at low temperature or in snow. ( p. 36)
8.5 Preparing for rides on dry sand
102136-01
–
Mount a dust cover on the air filter.
Dust cover for air filter (79006920000)
Info
See the Husqvarna Motorcycles accessories fitting
instructions.
102138-01
–
Mount a sand cover on the air filter.
Sand cover for air filter (79006922000)
Info
See the Husqvarna Motorcycles accessories fitting
instructions.