Husqvarna FC 350 2016, Руководство по ремонту

Страница: 150 / 310

16 BRAKE SYSTEM
I
148
Main work
- Stand the vehicle upright.
- Remove screw cap
O
with membrane
8
and the O-ring.
Add brake fluid to level f).
I Brake fluid DOT 4 (
l!!ll p. 280)
- Mount and tighten the screw cap with the membrane and O­
ring.
• Info
I
Clean up overflowed or spilled brake fluid immediately
with water.
Changing the rear brake fluid
Warning
Skin irritation
Brake fluid causes skin irritation.
- Keep brake fluid out of the reach of children.
- Wear suitable protective clothing and safety glasses.
- Do not allow brake fluid to come into contact with the skin, the eyes or clothing.
- Consult a doctor immediately if brake fluid has been swallowed.
- Rinse the affected area with plenty of water in the event of contact with the skin.
- Rinse eyes thoroughly with water immediately and consult a doctor if brake fluid comes into contact
with the eyes.
- If brake fluid spills on to your clothing, change the clothing.
Warning
Environmental hazard
Hazardous substances cause environmental damage.
- Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance
with the applicable regulations.
Info
Avoid contact between brake fluid and painted parts. Brake fluid attacks paint!
Use only clean brake fluid from a sealed container.
- Cover the painted parts.
- Remove screw cap
O
with the membrane and O-ring.
- Draw the old brake fluid out of the brake fluid reservoir using
a syringe and fill with fresh brake fluid.
Syringe (50329050000) ( a p. 286)
Brake fluid DOT 4 ( il\:!l p. 280)