Husqvarna FC 250, Руководство пользователя

Страница: 55 / 149

11 SERVICE WORK ON THE CHASSIS
53
400738-11
Main work
–
Move the handlebar to the straight-ahead position. Move the
fork legs to and fro in the direction of travel.
No play should be noticeable in the steering head bearing.
» If there is noticeable play present:
–
Adjust the steering head bearing play. ( p. 53)
–
Move the handlebar to and fro over the entire steering range.
The handlebar must be able to move easily over the entire
steering range. No resting locations should be noticeable.
» If click positions are noticeable:
–
Adjust the steering head bearing play. ( p. 53)
–
Check the steering head bearing and change if neces-
sary.
Finishing work
–
Remove the motorcycle from the lift stand. ( p. 46)
11.12 Adjusting the steering head bearing play
Preparatory work
–
Raise the motorcycle with a lift stand. ( p. 46)
–
Remove the handlebar cushion.
S02019-10
Main work
–
Loosen screws
1
.
–
Remove screw
2
.
–
Loosen and retighten screw 3 .
Guideline
Screw, top steering
head M20x1.5 12 Nm (8.9 lbf ft)
–
Using a plastic hammer, tap lightly on the upper triple clamp
to avoid stresses.
–
Tighten screws
1
.
Guideline
Screw, top triple
clamp M8 17 Nm (12.5 lbf ft)
–
Mount and tighten screw
2
.
Guideline
Screw, top
steering stem M8 20 Nm (14.8 lbf ft)
Loctite ® 243™
Finishing work
–
Check the steering head bearing play. ( p. 52)
–
Remove the motorcycle from the lift stand. ( p. 46)
–
Mount the handlebar cushion.