Husqvarna FC 250, Руководство пользователя

Страница: 66 / 149

11 SERVICE WORK ON THE CHASSIS
64
11.29 Changing the glass fiber yarn filling of the main silencer
Warning
Danger of burns
The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
Info
Over time, the fibers of the glass fiber yarn escape and the damper "burns" out.
Not only is the noise level higher, the performance characteristic changes.
Preparatory work
–
Remove the right side cover. ( p. 64)
–
Remove the main silencer. ( p. 63)
402618-10
Main work
–
Remove all screws on the main silencer.
–
Take off silencer cap 1 .
–
Take off outer tube
2
.
–
Pull glass fiber yarn filling
3
off of inner tube
4
.
–
Clean the parts that need to be reinstalled and check for
damage.
–
Mount the new glass fiber yarn filling
3
on the inner tube.
–
Slide outer tube
2
over the glass fiber yarn filling.
–
Insert silencer cap
1
into the outer tube.
–
Mount and tighten all of the screws.
Guideline
Screws on the main
silencer M5 7 Nm (5.2 lbf ft)
Finishing work
–
Install the main silencer. ( p. 63)
–
Install the right side cover. ( p. 65)
11.30 Removing the right side cover
S02036-10
–
Remove screw
1
.
–
Pull off the side cover sideways in areas A and B , and
remove toward the front.