Husqvarna F2101R1, Руководство по ремонту, Страница: 228 / 330

17 ENGINE
- Position lock ring
(D
on special tool
f)
and push down with sleeve G).
✓ The lock ring engages in the groove of the transmission shaft.
- Mount stop disk
@.
- Mount needle bearing
fD
and third-gear idler gear
@)
with the shift dogs facing upward.
- Mount stop disk Gi) and lock ring
G,.
- Mount fourth-gear sliding gear
48
with the shift groove facing downward.
- Mount stop disk 41).
- Mount needle bearing
41)
and first-gear idler gear 41).
- Mount stop disk Ci).
- Finally, check all the gear wheels for smooth operation.
17.5
17.5.1
17.5.2
226
En ine assembly
Installing the crankshaft
- Position the right section of the engine case in the engine
assembly stand.
Oil the bearing.
I Engine oil (SAE 1 0W/50) (
8 p. 298)
- Slide crankshaft
O
into the bearing seat.
Installing the transmission shafts
- Oil the bearing.
- Slide both transmission shafts
O
into the bearing seats
together.
- Mount lock ring
8-
..
..
..