Husqvarna DXR 145, Руководство оператора, Страница: 77 / 120

3. Remove the dipstick (A).
A
4. Clean the oil from the dipstick.
5. Put the dipstick back in and tighten it.
6. Remove the dipstick again and read the oil level.
The oil level is correct when it is between the "Max."
and "Min." marks on the dipstick.
MAX
MIN
7. If the oil level is low, fill the oil through the hole for
the dipstick. Fill the oil slowly. Refer to
Technical
data on page 107 .
8. Do a check of the oil level again.
To do a check of the oil level in the
drive motor
1. Start the product. Refer to
To start the product (DXR
145) on page 52 and To start the product (DXR 275,
DXR 305, DXR 315) on page 53
.
2. Operate the caterpillar tracks until 1 of the plugs is
level with the center of the hub. The other plug is in
the top position.
3. Park the product on level ground and stop the
product. Refer to
To stop the product (DXR 145) on
page 62
and
To stop the product (DXR 275, DXR
305, DXR 315) on page 62 .
4. Clean the area around the plugs to prevent
contamination of the drive motor system.
5. Remove the level plug (A).
A
B
6. Look in the level plug hole (B). The oil level is correct
when the oil is at the edge of the level plug hole.
1401 - 002 - 15.10.2021 77