manualshive.com logo in svg

Husqvarna DXR 145, Руководство оператора, Страница: 66 / 120

Поделиться
Скачать
Husqvarna DXR 145 Скачать руководство пользователя страница 66

To clean the hydraulic oil cooler (DXR 145)

WARNING: 

Risk of burn injury. Let the

hydraulic oil cooler become cool before you

clean it.

• Clean the area around the hydraulic oil cooler with

water and weak cleaning agent.

• Clean the cooling fins on the hydraulic oil cooler with

compressed air.

• If the cooling fins do not become clean with

compressed air, use a high pressure washer and a

cleaning agent.

• To prevent damage to the cooling fins, obey these

instructions:
a) Only use maximum pressure of 100 bar/1450 psi.
b) Make sure that there is a minimum of 40 cm/15.7

in. between the hydraulic oil cooler and the

nozzle.

c) Point the water or the air straight at the hydraulic

oil cooler, parallel with the cooling fins.

To clean the hydraulic oil cooler (DXR 275,

DXR 305, DXR 315)

WARNING: 

Risk of burn injury. Let the

hydraulic oil cooler become cool before you

clean it.

• Clean the area around the hydraulic oil cooler with

water and weak cleaning agent.

• Clean the cooling fins on the hydraulic oil cooler with

compressed air.

• If the cooling fins do not become clean with

compressed air, use a high pressure washer and a

cleaning agent.

• To prevent damage to the cooling fins, obey these

instructions:
a) Only use maximum pressure of 100 bar/1450 psi.
b) Make sure that there is a minimum of 40 cm/15.7

in. between the hydraulic oil cooler and the

nozzle.

c) Point the water or the air straight at the hydraulic

oil cooler, parallel with the cooling fins.

To clean the electrical components

• Clean the electric motor, the electrical enclosure, the

electrical terminals and the other electrical

components. Use a cloth or compressed air.

CAUTION: 

Do not use water

directly on the electrical components.

• Clean the outer parts of the remote control with a

moist cloth. Clean the inner parts of the remote

control with compressed air.

66

1401 - 002 - 15.10.2021

Содержание DXR 145

























































































































Отзывы:

Нет отзывов