Husqvarna DE 110i, Руководство оператора, Страница: 19 / 104

To do after completed work
1. Do the filter purge procedure. Refer to
To remove
dust particles from the prefilter during operation on
page 18
.
2. Stop the product, refer to To start and stop on page
18 .
3. Discard the Longopac bag. Refer to
To discard a full
Longopac bag and prepare a new Longopac bag on
page 18
.
4. Clean the product. Refer to
To clean the product on
page 20
.
5. Prepare the product for transportation. Refer to
To
move the product long distances on page 24
.
Maintenance
Introduction
WARNING:
Read and understand the
safety chapter before you do maintenance
work on the product.
WARNING:
Remove the battery before
you do maintenance on the product.
WARNING:
Failure to do maintenance
correctly can decrease the product life
cycle and increase the risk of accidents.
All servicing and/or repair work must also
be done by a professional. Turn to your
servicing dealer for more information.
WARNING:
Make sure that you
obey all local regulations to dispose the
dangerous dust correctly, before and during
maintenance.
Maintenance schedule
The maintenance intervals are calculated from daily use
of the product. The intervals change if the product is not
used daily.
Maintenance
Before
each use
Daily Weekly
When
suction is
low
Each 6
months or
600 h
Each 12
months or
2000 h
Do the filter purge procedure. Refer to
To remove dust particles from the prefil-
ter during operation on page 18
.
X
Look for signs of wear or damage of the
dust release rubber cone.
X
Look for signs of wear, damage or loose
connections of the controls before the
unit is connected.
X
Do a check of the hose and the hose
connectors.
X
Look for signs of wear or damage of the
plastic parts.
X
Do a check of the lifting eyes. X
Make sure that the Longopac is correct
and that it is correctly attached. Refer to
To install a new Longopac bag cassette
on page 18
.
X
Do a check of the filter purge function. X
Do a check of the wheels. Look for
damage and bad connections.
X
Do a check of the filter seals X
1618 - 004 - 24.01.2022 19