Husqvarna 966613201, Руководство оператора

Страница: 25 / 65

OPERATION
25
8058-048
Cutting height selection
Before Starting
1. Read the sections on
Safety
and
Controls
before
starting the machine.
2. Perform the daily maintenance before starting
(see
Maintenance Schedule
in the
Maintenance
section).
3. Check that there is sufficient fuel in the fuel tank.
4. Adjust the seat to the desired position.
5. Set the deck cutting height by inserting the lift pin
into the desired cut height.
The following conditions must be fulfilled before the
engine can be started:
• The blade switch must be pressed downward into
the disengaged position.
• The parking brake must be up into the activated
position.
• Both steering controls must be in the locked
(outer) neutral position.
8011-441
Lengthways adjustment