Husqvarna 966613201 Скачать руководство пользователя | Manualshive

Страница: 11 / 65

background image

SAFETY

11

8011-670

Personal protective equipment

6003-004

Mow up and down, not side to side

WARNING!
When using the machine, approved
personal protective equipment
(shown in illustrations) shall be
used. Personal protective equipment
cannot eliminate the risk of injury but
it will reduce the degree of injury if
an accident does happen. Ask your
retailer for help in choosing the right
equipment.

WARNING!
Do not drive up or down hills with
slopes greater than 10 degrees. Do
not drive across any slopes.

Personal Safety Equipment

• Make sure that you have first aid equipment close

at hand when using the machine.

• Never use the machine when barefoot.
• Always wear protective shoes or boots, preferably

with steel toe caps.

• Always wear approved protective glasses or a full

visor when assembling or driving.

• Always wear gloves when handling the blades.
• Never wear loose clothing that can get caught in

moving parts.

• Use ear protectors to avoid damage to hearing.

Slope Operation

Slopes are a major factor related to loss of control and
tip-over accidents, which can result in severe injury or
death. Operation on all slopes requires extra caution.
If you cannot back up the slope or if you feel uneasy
on it, do not mow it.
• Mow up and down slopes (10 degrees maximum),

not across.

• Watch for holes, ruts, bumps, rocks, or other

hidden objects. Uneven terrain could overturn the
machine. Tall grass can hide obstacles.

• Choose a low ground speed so that you will not

have to stop while on the slope.

• Do not mow on wet grass. Tires may lose traction.
• Avoid starting, stopping, or turning on a slope. If

the tires lose traction, disengage the blades and
proceed slowly straight down the slope.

• Keep movement on the slopes slow and gradual.

Do not make sudden changes in speed or
direction, which could cause machine to roll over.

• Use extra care while operating machine with

grass catchers or other attachments; they can
affect the stability of the machine.

«
...
9
10
11
12
13
...
»

Содержание 966613201


































































Отзывы:

Нет отзывов

Похожие инструкции для 966613201

Wildcat STWC48V-25CV

Бренд: Scag Power Equipment Страницы: 82

Бренд: Land Pride Страницы: 62

Бренд: MTD Страницы: 20

Бренд: Yard Machines Страницы: 16

Бренд: Ransomes Страницы: 134

Бренд: Poulan Pro Страницы: 31

Бренд: Cub Cadet Страницы: 2

TH910 Series II

Бренд: Deutscher Страницы: 22

Бренд: Yard-Man Страницы: 16

Бренд: ECLOZ Страницы: 56

Бренд: MTD Страницы: 16

Бренд: Simplicity Страницы: 64

Бренд: DR Power Страницы: 44

Бренд: Peco Страницы: 21

Бренд: Peco Страницы: 26

Бренд: Craftsman Страницы: 34

Бренд: Craftsman Страницы: 34

Бренд: Craftsman Страницы: 56

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды