background image

4

REGISTER THE PRODUCT

Please register your new 

5000

 with Husqvarna Construction Products by mailing  

in the registration card that came with the machine or you can register on the internet site  

www.husqvarnawarranty.com

Registration will allow us to contact in case of any critical updates or recalls on this machine.   

Warranty registration has also been found to be helpful in tracing stolen equipment.

Record the following information for your records:

PURCHASE DATE: ________________

MODEL No: ________________ 

 

SERIAL No: __________________

ENGINE MODEL: _____________   ENGINE TYPE: ______________  ENGINE CODE: ________________

The 5000 model and serial number as well as the engine model number, engine type and code are critical in order 

to obtain the correct service parts.

SAFETY HAZARDS

CAUTION 

HEARING HAZARD

During the normal use of this  

machine, operator may be  

exposed to a noise level equal 

to or higher than 85 dB(A).  Use 

hearing protection. 

WARNING

ASPHYXIATION HAZARD

Running an engine in a con-

fined or badly ventilated area 

can result in injury or death due 

to asphyxiation or carbon  

monoxide poisoning.

WARNING

CALIFORNIA PROP 65

Use of this product can expose 

you to materials known to the 

State of California to cause  

cancer and/or birth defects or 

other reproductive harm.

WARNING

DO NOT MODIFY THE PRODUCT

Under no circumstances may the design of the machine be modified without the permission of the manu

-

facturer. Always use genuine accessories.  Unauthorized modifications and/or accessories can result in 

serious personal injury or the death of the operator or others.  Your warranty may not cover damage or 

liability caused by the use of unauthorized accessories or replacement parts.

SAFETY DEFINITIONS

In this manual a Safety Alert Symbol         followed by the signal words WARNING and CAUTION are used to 

identify safety information about hazards which can result in death, serious injury and/or property damage.

These signal words mean:

  

        WARNING 

indicates a hazard which, if not avoided, 

could result in death or serious injury.

        CAUTION 

indicates a hazard which, if not avoided, 

might result in minor or moderate injury.

        NOTICE 

indicates a message not related to personal injury.

 

Содержание 5000



















Отзывы: