Note:
This device complies with Part 15 of
the FCC Rules [and with Industry Canada
licence-exempt RSS standard(s)]. Operation is
subject to the following two conditions: this
device may not cause harmful interference,
and this device must accept any interference
received, including interference that may
cause undesired operation.
Note:
This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
•
Reorient or relocate the receiving
antenna.
•
Increase the separation between the
equipment and receiver.
•
Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced
radio/TV technician for help.
WARNING:
Cancer and
Reproductive Harm -
www.P65Warnings.ca.gov.
11 Compliance requirements, Brazil
For the model:
•
Husqvarna Automower
®
310
Regulatory Compliance Anatel: This
equipment does not have direct protection
from harmful interference and may not cause
interference with duly authorized systems.
This product is homologated by ANATEL, in
accordance with the procedures regulated by
Resolution 242/2000, and meets the technical
requirements applied. For more information,
see the ANATEL website www.anatel.gov.br.
06145-18-11674
For the models:
•
Husqvarna Automower
®
430X
•
Husqvarna Automower
®
450X
This product contains the module SARA-U201
homologation code ANATEL 04466-15-05903
This product contains the module HMI Board
Type 13 homologation code ANATEL
07393-19-11674.
36 - Compliance requirements, Brazil
1418 - 002 -