3 Installation
3.1 Connecting the power supply
Take the following into consideration when
planning where to place the power supply:
•
Close to the charging station
•
Protection from rain
•
Protection from direct sunlight
WARNING:
The product is only to
be used with a power supply unit
supplied by Husqvarna.
When connecting the power supply, only use
a wall socket that is connected to an earth
fault-breaker (RCD).
WARNING:
Risk of Electric Shock.
Install only to an earth-fault breaker
(RCD) when connecting the power
supply to the wall socket. For USA/
CANADA: Use a covered Class A
GFCI receptacle (RCD) that has an
enclosure that is weatherproof with
the attachment plug cap inserted or
removed.
WARNING:
No parts of the power
supply must be changed or
tampered with. The low voltage
cable must not be shortened or
extended.
Low-voltage cables of different lengths are
available as accessories.
WARNING:
The power supply
cable and extension cable must be
outside the work area to avoid
damage to the cables.
WARNING:
Do not under any
circumstances mount the power
supply at a height where there is a
risk it can be submerged in water (at
minimum 30 cm / 12" from the
ground). It is not permitted to place
the power supply on the ground.
min 30 cm / 12”
WARNING:
Use the plug to
disconnect the charging station, for
instance before cleaning the
charging station or repairing the loop
wire.
WARNING:
Place the low voltage
cable and adjust the cutting height
so that the blades on the blade disc
can never come in contact with the
cable.
WARNING:
To reduce the risk of
damage to electrical components,
disconnect all connections to the
charging station (power supply,
boundary wire and guide wires) if
there is a risk of a thunderstorm.
WARNING:
Do not encapsulate
the power supply. Condensed water
can harm the power supply and
increase the risk of electrical shock.
For more instructions on how to do a proper
installation, refer to chapter
Installation
in the
complete Operator's manual on Husqvarna's
website www.husqvarna.com.
14 - Installation
1418 - 002 -