Husqvarna 2014 TE 125 EU, Руководство пользователя

Страница: 36 / 128

10 SERVICE SCHEDULE
34
10.1 Service schedule
Every 40 operating hours/after every race
Every 20 operating hours
Check that the electrical equipment is functioning properly.
● ●
Check and charge the battery.
x
(TE 250/300)
● ●
Change the gear oil.
x
( p. 96)
● ●
Check the front brake linings. ( p. 68)
● ●
Check the rear brake linings. ( p. 72)
● ●
Check the brake discs. ( p. 67)
● ●
Check the brake lines for damage and leakage.
● ●
Check the rear brake fluid level. ( p. 71)
● ●
Check the free travel of the foot brake lever. ( p. 70)
● ●
Check the frame and swingarm.
x
● ●
Check the swingarm bearing.
x
●
Check the heim joints at the top and bottom of the shock absorber.
x
● ●
Check the tire condition. ( p. 77)
● ●
Check the tire air pressure. ( p. 78)
● ●
Check the wheel bearing for play.
x
● ●
Check the wheel hubs.
x
● ●
Check the rim run-out.
x
● ●
Check the spoke tension. ( p. 78)
● ●
Check the chain, rear sprocket, engine sprocket, and chain guide. ( p. 59)
● ●
Check the chain tension. ( p. 58)
● ●
Grease all moving parts (e.g. side stand, hand lever, chain, ...) and check for smooth operation.
x
● ●
Check/rectify the fluid level of the hydraulic clutch. ( p. 63)
● ●
Check the front brake fluid level. ( p. 67)
● ●
Check the free travel of the hand brake lever. ( p. 66)
● ●
Check the play of the steering head bearing. ( p. 48)
● ●
Change the spark plug and spark plug connector. x
● ●
Check the intake diaphragm.
x
● ●
Check the exhaust control to ensure it is functioning properly and operating smoothly.
x
●
Check the clutch.
x
●
Check all hoses (e.g. fuel, cooling, bleeder, drainage, etc.) and sleeves for cracking, leaks, and incorrect routing.
x
● ●
Check the antifreeze and coolant level. ( p. 86)
● ●
Check the cables for damage and routing without sharp bends.
x
● ●
Check that the throttle cables are undamaged, routed without sharp bends, and set correctly.
● ●
Clean the air filter and air filter box.
x
( p. 53)
● ●
Change the glass fiber yarn filling of the main silencer. x ( p. 54)
● ●
Check the screws and nuts for tightness.
x
● ●
Check the headlight setting. ( p. 84)
● ●
Check the idle.
● ●
Final check: Check the vehicle for safe operation and take a test ride.
● ●
Make the service entry in Husqvarna Dealer.net and in the service booklet.
x
● ●
●
Periodic interval