Husqvarna 2014 TE 125 EU, Руководство пользователя

Страница: 44 / 128

11 TUNING THE CHASSIS
42
11.14 Handlebar position
800116-10
On the upper triple clamp, there are two holes a distance of
A
apart.
Hole distance A 15 mm (0.59 in)
The holes on the handlebar support are placed at a distance of
B
from the center.
Hole distance B 3.5 mm (0.138 in)
The handlebar can be mounted in four different positions. In this way, the handlebar can
be mounted in the position that is most comfortable for the rider.
11.15 Adjusting the handlebar position
x
0 0 2
2
0
0 1 1
0 0 2 2
1 1
B00375-10
–
Remove screws
1
. Remove the handlebar clamp. Remove the handlebar and lay it
to one side.
Info
Protect the motorcycle and its attachments against damage by covering
them.
Do not bend the cables and lines.
–
Remove screws
2
. Remove the handlebar support.
–
Place the handlebar support in the required position. Mount and tighten screws
2
.
Guideline
Screw, handlebar support M10 40 Nm
(29.5 lbf ft)
Loctite ® 243™
Info
Position the left and right handlebar supports evenly.
–
Position the handlebar.
Info
Make sure the cables and wiring are positioned correctly.
–
Position the handlebar clamp. Mount and tighten screws
1
.
Guideline
Screw, handlebar clamp M8 20 Nm (14.8 lbf ft)
Info
Ensure that the gap widths are even.