Husqvarna 2011 SMS 125, Руководство по ремонту

Страница: 50 / 244

D.24
H02680
2
1
H02681
3
H02682
SETTINGS AND ADJUSTMENTS
Ed. 05-2011
Front fork adjustment
Front fork has no adjustment.
Steering bearing clearance adjustment
For safety reasons, the steering should always be adjusted so that the handlebar
turns freely and without play. To check steering adjustment, set a stand or a block
under the engine and see that the front wheel is lifted from the ground. Press
lightly on the handlebar grips to cause the front end to rotate; the handlebar should
turn smoothly. Sit on the ground in front of the front wheel and hold the lower
ends of the fork legs. Push and pull in a front to rear motion to feel for play.
If any play is detected, adjust as follows:
- Loosen the steering head tube nut (1);
- Loosen the four bolts (3) that secure the fork legs to the steering head; -
Turn the steering head tube ring nut (2) clockwise using the special key until
achieving correct play adjustment;
- Tighten the steering head tube nut (1) to 80÷90 Nm, 7÷9 Kgm, 59÷66,38 ft/
Ib;
- Tighten the four bolts (3) on the steering head to 22,5÷26,5 Nm, 2,3÷2,7 Kgm,
16,59÷19,55 ft/Ib.