Husqvarna 2011 SMS 125, Руководство по ремонту

Страница: 196 / 244

M.22
H02568
1
H02569
2
ELECTRICAL SYSTEM
Ed. 05-2011
HEADLAMP, TAIL LIGHT
Headlamp adjustment
The headlamp features a twin bulb for low and high beam and a festoon bulb
for the city or parking light. Beam setting needs to be performed accurately;
proceed as follows:
- Place the motorcycle 10 metres away from a vertical wall;
- the motorcycle must be on level ground and the optical axis of the headlamp
must be perpendicular to the wall;
- the motorcycle must be upright;
- measure the height from the ground to the centre of the lamp and draw a cross
on the wall at the same height;
- when the low beam is on, the upper edge between dark and lit zone should
be at 9/10th of the height of headlamp centre from ground. Beam height can
be raised or lowered turning the screw (1).
Headlamp bulbs replacement
Proceed as follows to reach the headlamp bulbs:
- remove the headlamp fairing as outlined in the relevant paragraph;
- detach connector (1) from the bulb;
- slide off the rubber gaiter (2);