Husqvarna Viking Sapphire 830, Руководство пользователя

Страница: 9 / 48

9
1
A
Getting ready to sew
Lower the feed teeth
The feed teeth are lowered when you move the switch on the
front of the free arm to the right. Move the switch to the left if
you wish to raise the feed teeth. The feed teeth will raise as you
begin to sew. The feed teeth should be lowered when sewing on
buttons and for free motion sewing.
Changing the presser foot
Turn off the main switch
1. Make sure the needle is in the highest position. Pull the
presser foot towards you.
2. Line up the cross pin on the foot with the gap in the presser
foot ankle. Push back until the foot snaps into place.
Changing the needle
Turn off the main switch
1. Loosen the screw in the needle clamp (A) with the
screwdriver.
2. Remove the needle.
3. Push the new needle upwards with the fl at side away from you
until it will go no further.
4. Use the screwdriver to tighten the screw.