30
Operating the machine
Pop-up messages
Bobbin winding on
This pop-up message appears when the bobbin winding spindle is
pushed to the right and bobbin winding is activated.
Presser foot too high
Your machine will not sew if there is too much fabric under the
presser foot. Remove some of the fabric or use another fabric.
Press the OK button, or tap the foot control to close the pop-up
message.
Machine set for twin needle
When you have set the machine for twin needle in the SET Menu,
a pop-up message is shown to remind you of the setting when
you turn on your machine. Press the OK button or tap the foot
control to close the pop-up message.
Stitch width limited for twin needle
This message is shown when the machine is set for twin needle
and you select a stitch. It informs you that the width of the stitch
is limited. You will also get this message when the machine is set
for twin needle and you try to adjust the stitch width to wider
than possible with the twin needle. Close the pop-up message by
pressing the OK button.
Machine set for straight stitch
This message is shown when the stitch width safety is on and you:
- turn on the machine,
- select a stitch wider than 0 mm,
- try to adjust the stitch width.
Close the pop-up message by pressing the OK button.
This stitch cannot be sewn with twin needle
This pop-up message appears when the machine is set for twin
needle and you select the stitch for sewing on a button, No. 9.
Press the OK button to close the pop-up.
Содержание Sapphire 830
Страница 1: ...User s Guide ...
