Husqvarna Viking Sapphire 830 страница 8 Скачать руководство пользователя

Страница: 8 / 48

Getting ready to sew

Connecting the foot control

Among the accessories you will

nd the foot control cord and the

main cord. Connecting the foot control cord to the foot control
is only necessary the very

rst time you are going to use the

machine.

1. Take out the foot control cord. Turn the foot control over.

Connect the cord to the socket inside the space of the foot
control.

2. Push

rmly to make sure it is properly connected.

3. Lay the cord in the slot on the underside of the foot control.

Connect to the power supply

On the underside of the machine you will

nd information about

the power supply voltage (V) and the frequency (Hz).

Before plugging in the foot control, check to ensure that it is of type “FR5”
(see underside of foot control).

1. Connect the foot control cord to the front socket on the

bottom right side of the machine.

2. Connect the power cord to the rear socket on the bottom

right side of the machine.

3. When you press the power switch to ON, both the machine

and the light are switched on.

For the USA and Canada

This sewing machine has a polarized plug (one blade wider
than the other). To reduce the risk of electric shock, this
plug is intended to

t in a polarized outlet only one way. If

the plug does not

t fully in the outlet, reverse the plug. If

it still does not

t, contact a quali

ed electrician to install

the proper outlet. Do not modify the plug in any way.

Содержание Sapphire 830

















































Результаты поиска

Содержание Sapphire 830

Отзывы:

Похожие инструкции для Sapphire 830

Бренды по названию

Популярные бренды

Husqvarna Viking Sapphire 830, Руководство пользователя

Результаты поиска

Содержание Sapphire 830

Отзывы:

Похожие инструкции для Sapphire 830

Бренды по названию

Популярные бренды