Huskie Tools HH1500, Руководство по обслуживанию

Страница: 25 / 60

25
8. Insert and tighten the four side rods together with the washer to the specified torque
(see Table 4 and Figure 5 on page 14.)
9. Refill the hammer with Nitrogen (N
2
) gas. Refer to pages 15 and 16.
Make sure that the piston is positioned at the lower end of its stroke before charging. The
piston and the cylinder may be damaged during gas charging by sudden movement (due
to a pressure increase) if the piston is not at the bottom of its stroke in the cylinder.