www.PyleUSA.com
8
2.4 Charging
1. Your scooter will be fully charged when the LED light on the charger changes
from red (charging
)
to green. Even so, we still don't recommend charging
your scooter for long time.
2. Do not connect the charger if the charging port is wet. Cover the charging
port when not use.
3. CONTROLS AND DISPLAY
PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY
3.1 Operating Procedures
Note:
When riding the scooter, you must ensure you are stepping on the foot
mats. Do not step or stand on any other area of your scooter.
1.
Switch:
Press and hold the power button for 2 to 3 seconds to turn ON/OFF
the power
2.
Acceleration:
Press the right acceleration button to start and accelerate;
3.
Brake:
Hold the brake handle to brake. Lightly step on the rear fender to assist
the brakes;
4.
Short press the power button to directly adjust the speed
Beginner mode:
”
S
” gear characters display in blue
Normal mode:
”
S
” gear characters display in yellow
Sports mode:
”
S
” gear characters display in red
5.
Headlights:
Press the power button 2 continuously to turn ON/OFF the
headlights.
