www.PyleUSA.com
7
2.3 Assembly
1. Press down on the folding spanner with your feet.
Unfold the stem and push it until you hear a click.
Then unfold the kickstand to support the scooter.
2. Connect the power cable. Attach the head-stock to
the pole. Then tighten the screws onto both sides
of the pole with the included wrench.
3. Install the brake on the left side, then use the
included screwdriver to tighten it.
4. Rotate in counterclockwise direction to install the
two handles. Then verify that your scooter powers
on and off.
WARNING
Any E-Scooter that does not work properly can cause you to lose control and fall.
Inspect the entire device thoroughly before every ride, and do not ride it until any
problems have been corrected.
