HURST P 630 SG, Инструкция по эксплуатации

Страница: 19 / 44

19
7.2.3 Commissioning (after the first filling or prior to use)
1. Check the fluid level of the engine oil, the hydraulic fluid and the fuel tank. Top up if
necessary. For precise reading off of the fluid levels and for filling, the hydraulic unit
should be as level as possible.
2. Now connect the extension hoses and/or hose reels (unless already connected to the unit)
and/or couple the rescue equipment.
Before starting the combustion engine, check that the fuel tank is full and that the engine oil
level is within the permitted tolerances. If necessary, top up the relevant fluid.
1. Open the gasoline tap
2. Set the ON/OFF switch to the ON position.
3. Move the lever from switching position A to switching
position B (choke) when starting cold
4. Pull the cable-starter.
5. When the motor is running, switch the lever back to
position A.
For the detailed procedure for starting the
combustion engine, please see the
separate operating instructions of the engine manufacturer!
B
A
8.1 Starting the engine
8. Operation