HURST P 630 SG, Инструкция по эксплуатации

Страница: 13 / 44

13
5.4 Valves
Both valves of the power unit in the pump block are fixed in place. The pump block is fully
integrated into the hydraulic power unit. The hose assemblies (pressure line (grey) and
return (blue)) must be connected to the pump block. The rescue equipment is connected to
the hose assemblies. Model P 630 units are equipped with a SIMO connecting block.
The connecting block of the P 630 SG also has a TURBO function.
With a “TURBO” control lever, either both connected devices can be supplied simultaneously
with hydraulic fluid, or a single device can be supplied with double the volume (= TURBO
function). By supplying at double the feed rate, the speed of the connected device is
increased.
The hoses are connected with the connecting block via mono-couplings.
Control valve "simultaneous operation" (SIMO)
This valve enables the connection of two pressure hoses and two return hoses. It has two
switching options, each of which controls the pressure application of the pressure hose
that is marked accordingly. This means that two devices can be supplied with pressure
simultaneously and independently of each other. Without impairing the work output, it
enables work with two devices simultaneously and independently of each other.
ATTENTION!
When operating several pieces of rescue equipment with one unit, ensure
that the usable volume of hydraulic fluid in the power unit is greater than the
maximum possible operating fluid volume of all connected rescue equipment.