18
aSSeMBLIng and CLeanIng tHe Squeezer
1. Turn completely off and the remove the plug from the power outlet before cleaning.
2. Remove the cone and serving spout from the body and clean the parts under running water.
3. Rinse or wash all squeezer parts immediately after use. Dried pulp is difficult to clean.
do not WaSH at HIgH teMperatureS of 80
℃
or HIgHer.
do not put tHe appLIanCe and partS In a dISHWaSHer,
dryer or a MICroWaVe etC.
It may cause a failure or parts deformation.
1
fit the cone onto the spin axis on the
body.
Mount the serving spout on the body.
Align the grooves on the bottom of the
serving spout with the body bumps.
assembling the squeezer set on the body
Cleaning
2
Safety
sensor
Cone
Safety
sensor
note
