21
Spinning Brush
Juice Cap packing
CLeanIng: SILICone partS
1
2
Open the juice cap. hold the chamber and juice cap with
one hand, and remove the juice cap packing with the other
hand to disassemble.
Please be careful not to drop or damage the juice cap and
chamber when disassembling the unit.
remove the silicone brush from the spinning
brush holder.
using a cleaning brush, wash the inside and
outside of the spinning brush holder under
running water.
Pull on the silicone brush outward (as shown in
the diagram to the left). Please follow the above
method to prevent damage of spinning brush
holder and silicone brush.
Wash the silicone brush under running water using
the same method.
If you push on the mid gear from
the under-side of the chamber, the
gear will pop out.
After cleaning the chamber set,
make sure the mid gear packing is
in place.
Place the mid gear back into its ap-
propriate spot inside the chamber
only after the mid gear packing is
set in place.
Mid gear and Mid gear packing
