Operation
Chapter 5
Adjusting the plate dispensing tube
Page 21
Food transport trolley
91319926_A0
SPTW-2/EBF/TEHCO
Adjustment of crockery guides
Figure 4
Crockery guides
Release the crockery guides (A) out of the locking position by lifting them and put them on the outermost po-
sition.
§
Load a stack of 10 to 12 plates on the guide basket.
§
Turn the crockery guides (A) and fix them in the corresponding locking position with respect to the
crockery diameter. Check by pressing slightly the crockery stack, whether it can move easily on its
guide without rocking.
§
All three crockery guides must be fixed in the same locking positions to ensure uniform loading of the
stacking platform.
§
After the appliance is loaded and before transport begins, the guide rails must be checked again
manually to ensure that they are fixed.
Adjust retaining bolts
Figure 5
Retaining bolts
§
Remove the crockery guides in the area of the retaining bolts (B) by pressing them down slightly and
fit them onto the other retaining bolts (B).
INFO
Crockery diameters
The following crockery diameters can be set with the locking positions provid-
ed: 19.0 / 21.5 / 23.5 / 26.0 cm.
