Description and Technical Data
Chapter 3
Appliance Description
Page 13
Mobile bain marie
4330036_A1
SPA/K-2DW | SPA/K-3DW
3.4
Appliance Description
3.4.1
View of the Appliance Mobile Bain Marie
Figure 1
View of the appliance SPA/K-2DW
1
Push bars
6
Connecting lead with mains plug
2
On / Off switch
7
Water drain tap
3
Protection plates
8
Plug park
4
Swivel caster with total brake
9
Cooling element
5
Swivel caster without total brake
10
Cooling well
3.4.2
Appliance Description
Mobile bain maries are mobile appliances made of high quality stainless steel with cooling wells. They hold
up prepared cold food in Gastronorm containers or individually packaged cold food.
2 or 3 GN 1/1 containers or their subdivisions hold up the food in continuous seamless cooling wells with a
maximum depth of 7.8''
(200 mm). The high quality special insulation of the cooling wells provide an all-
around thermal insulation.
Mobile bain maries operate with an electronic temperature regulation. The factory set value for the air tem-
perature in the well is 42.8 °F (6°C). This value is sufficient for the storage of most ready meals and in addi-
tion gives a problem-free cooling process without the formation of ice or bloom on the condenser or the ne-
cessity to intervene manually in the automatic defrosting cycles. The maximum cooling capacity will automat-
ically be called up.
The control panel is located user-friendly on the cooling element below the cooling well and is directly acces-
sible in order to simplify servicing. Factory settings should only be changed by authorised specialists.
The shelf is firmly welded to the circumferential pipe frame below the mobile bain marie and can be used as
additional surfaces. Only objects with a firm base may be stored on the shelves. Do not move the appliance
when there are open containers with liquids on it. The permitted total weight of the mobile bain marie may
not be exceeded.
Mobile bain maries are equipped with four swivel casters, two of which have total brakes that prevent the
appliance from moving. Plastic protection plates on the swivel casters protect the lateral sides of the appli-
ance and operating elements against damages. Two ergonomically formed push bars with integrated bump-
er protect your hands against injuries.
It is possible to clean the cooling wells easily and quickly through the drain tap. Due to the open base, the di-
rect outlet of liquids into on-site drain ducts or drains at the bottom is possible. The transfer into other con-
tainers is not necessary.
