Huntleigh AlphaBed, Руководство по обслуживанию

Страница: 39 / 94

22 Replacing the Compressor Silencer Bag
22.1 Remove the compressor/AV bracket assembly from the pump case (Refer to Page 13, Section
14.1, 14.2 and 14.3 (new style AV mounts) or Page 15, Section 16.1, 16.2 and 16.3 (old style
AV mounts)).
22.2 Remove four screws (Fig 10, Item 30) and carefully lift off the compressor lid (Fig 10, Item 20)
and gasket (Fig 10, Item 40) from the compressor assembly (Fig 10, Item 10). Discard the
gasket.
22.3 Disconnect the outlet tubes (Fig 10, Item 70) of the silencer bag (Fig 10, Item 50) from the ‘F’
tube connector (Fig 10, Item 60).
22.4 Disconnect the inlet tubes (Fig 10, Item 80) of the silencer bag from the valve bodies.
22.5 Fit a new silencer bag and gasket, then replace the compressor lid by reversing operations
detailed in Section 22.4, 22.3 and 22.2.
22.6 Refit the compressor/AV bracket assembly to the pump case (Refer to Page 13, Section
15.2,15.3 and 15.4 (new style AV mounts) or Page 15, Section 17.3, 17.4 and 17.5 (old style
AV mounts)).
Issue 2 Chap 3
Nov 2001 SER0004 Page 19
Mini Pump Service Manual Pump Repair
Item Part Number Description Qty
10 502003 Compressor Assy 230V 50Hz 11K/T 1
502002 Compressor Assy 110V 60Hz 5K/T (USA)
502007 Compressor Assy 100V 50/60Hz 4.5K/T (Japan)
20 502301 Compressor Lid 1
30 FAS054 Screw Countersunk Pozi M4 x 12 mm 4
40 BP032 Compressor Gasket 1
50 502055 Silencer Bag 1
60 500320 ‘F’ Tube Connector 1
70 N/A Silencer Bag Outlet Tubes REF
80 N/A Silencer Bag Inlet Tubes REF
Table 14 - Compressor Silencer Bag Part List