Huntleigh AlphaBed, Руководство по обслуживанию

Страница: 33 / 94

14 Removing the New Style AV Mounts
14.1 Remove the pressure control knob from the pump (Refer to Page 3, Section 2).
14.2 Remove the rear case assembly (Refer to Page 5, Section 6).
14.3 Carefully lift the compressor, mounting bracket (Fig 7, Item 10) and AV mounts (Fig 7, Item 20)
from the mounting pins (Fig 7, Item 30).
14.4 Remove the AV mounts from the mounting bracket and discard them.
15 Replacing the New Style AV Mounts
15.1 Fit new AV mounts (Fig 7, Item 20) of the same type to the mounting bracket (Fig 7, Item 10).
15.2 Carefully fit the compressor, mounting bracket and AV mounts to the mounting pins (Fig 7,
Item 30) in the pump case. Ensure that all four AV mounts are correctly located on the
mounting pins.
15.3 Assemble the rear case to the pump (Refer to Page 5, Section 7).
15.4 Assemble the pressure control knob to the pump (Refer to Page 3, Section 3).
Issue 2 Chap 3
Nov 2001 SER0004 Page 13
Mini Pump Service Manual Pump Repair