Huntleigh AlphaBed, Руководство по обслуживанию

Страница: 29 / 94

Note :The old bed hook bracket assemblies are left and right handed. Replacements are no longer
available.
10 Removing the Old Style Bed Hook
10.1 Remove the pressure control knob from the pump (Refer to Page 3, Section 2).
10.2 Remove the pump rear case (Refer to Page 5, Section 6).
10.3 Hold a hook plate (Fig 5, Item 30) in position and remove the three securing screws (Fig 5,
Item 40) from the inside of the rear case.
10.4 Carefully remove the hook plate and its bed hook (Fig 5, Item 10 or 20).
10.5 Repeat Section 10.3 and 10.4 for the other hook plate and bed hook if required.
Note : The above procedure will not be necessary when changing the old bed hooks for the new bed
hook which needs the new rear case assembly.
11 Installing the Old Style Bed Hook
11.1 When refitting the old bed hook brackets, replacement is the reversal of the above procedure.
11.2 Ensure correct orientation of the left and right-handed assemblies. (The spring on the right
hand assembly is colour coded red).
11.3 Position the hook and spring assembly on the rear case, install the hook plate and hold it in
place while inserting the three securing screws from the inside of the rear case.
11.4 Assemble the rear case to the pump (Refer to Page 5, Section 7).
11.5 Install the pressure control knob (Refer to Page 3, Section 3).
Issue 2 Chap 3
Nov 2001 SER0004 Page 9
Mini Pump Service Manual Pump Repair
Item Part Number Description Qty
10 N/A Bed Hook - Left Hand 1
20 N/A Bed Hook - Right Hand 1
30 N/A Hook Plate 1
40 N/A Pan Head screw PT 3 Dia. x 10 Pozi 6
Table 9 - Old Style Bed Hook Part List