Huntleigh AlphaBed, Руководство по обслуживанию

Страница: 35 / 94

16 Removing the Old Style AV Mounts
Note : Replacements are not available for the old style AV mounts.
16.1 Remove the pressure control knob from the pump (Refer to Page 3, Section 2).
16.2 Remove the rear case assembly (Refer to Page 5, Section 6).
16.3 Remove the securing spacers (Fig 8 Item 70) and carefully lift the compressor (Fig 8, Item 50)
and AV bracket assembly (Fig 8, Items 10, 20, 30, 40, 60) from the mountings.
16.4 Release the to AV mount nuts (Fig 8, Item 30) and washers (Fig 8, Item 40) and remove the
two AV mounting brackets (Fig 8, Item 10) from the AV mounts (Fig 8, Item 20).
16.5 Release the bottom AV mount nuts and washers and remove the four AV mounts from the
compressor mounting bracket (Fig 8, Item 60).
17 Installing the Old Style AV Mounts
17.1 Fit four replacement AV mounts (Fig 8, Item 20) to the compressor mounting bracket (Fig 8,
Item 60) and secure with washers (Fig 8, Item 40) and nuts (Fig 8, Item 30).
17.2 Fit the two AV mounting brackets (Fig 8, Item 10) to the AV mounts and secure with washers
and nuts.
17.3 Carefully fit the compressor (Fig 8, Item 50) and AV bracket assembly (Fig 8, Items 10, 20, 30,
40, 60) to the mountings in the pump case and fit securing spacers (Fig 8 Item 70).
17.4 Assemble the rear case to the pump (Refer to Page 5, Section 7).
17.5 Install the pressure control knob (Refer to Page 3, Section 3).
Issue 2 Chap 3
Nov 2001 SER0004 Page 15
Mini Pump Service Manual Pump Repair