HunterLab ColorFlex EZ Citrus, Руководство пользователя

Страница: 47 / 66

ColorFlex EZ Citrus Citrus User’s Manual Version 2.0
47
CHAPTER SEVEN
Maintaining and Testing ColorFlex EZ Citrus
The ColorFlex EZ Citrus requires very little maintenance This chapter describes the
maintenance necessary to keep the instrument functioning properly and provides tests to
assess performance.
Cleaning the ColorFlex EZ Citrus
Clean the outside surfaces of the ColorFlex EZ Citrus using a soft cloth. Do not spray liquids
directly on the instrument.
Maintaining the Instrument Standards
Before standardizing, inspect the calibrated White Tile and Black Glass for dust and fingerprints.
Do the same for the diagnostic Green Tile prior to running the Green Tile Test. Keep the
calibration tiles in the carrying case when not being used. If a tile is lost or damaged, contact
HunterLab as described in
WHEN YOU NEED ASSISTANCE concerning replacement.
Clean the tiles using a soft nylon bristle brush and a solution of warm water and a laboratory
grade detergent such as SPARKLEEN. Rinse the tiles in a stream of warm tap water. Blot them
dry using a clean, non-optically brightened, lint-free paper towel.
Note: SPARKLEEN is manufactured by Fisher Scientific Co., Pittsburgh, PA 15219
and may be ordered from them using catalog number 04-320-4. One tablespoon
of SPARKLEEN should be added to every gallon of water.
Replacing the Lamp
Lamp replacement requires a trained technician. Contact the HunterLab Field Service
Department to arrange for lamp replacement. Please read
WHEN YOU NEED ASSISTANCE prior
to contacting HunterLab.
Diagnostics
The Diagnostics Tests can be run to verify instrument performance. Diagnostics is selected from
the main menu by moving the cursor highlight to its position using the
UP and DOWN ARROW
buttons and then pressing the center GO button. The DIAGNOSTICS MENU appears.
Figure 79. Diagnostics Menu