HunterLab ColorFlex EZ Citrus, Руководство пользователя

Страница: 14 / 66

ColorFlex EZ Citrus Citrus User’s Manual Version 2.0
14
3.
Select READ from the ColorFlex EZ Citrus ’s MAIN MENU . Move the cursor to
highlight its position using the UP and DOWN ARROW buttons and then press the
GO button.
Figure 13. Main Menu > Read
4.
When beginning measurements of Citrus products, it is recommended to read the
hitched Citrus Standard as a Performance Qualification check. If the instrument is
still hitched correctly, it should read the assigned Hunter Lab C/2 values closely. If
not, reset the hitch to the OJ4 Standard as described under
USING A HITCH TO THE
CITRUS OJ Standard .
5.
To measure a sample, pour the sample into an empty sample tube until it is almost
full.
6.
Place the sample tube into the tube holder.
7.
Measure the sample by pressing the GO key.
Figure 14. Place sample at port
8.
The result is displayed.
9.
To view the next Citrus Score, press the UP ARROW .
Note: If a bar code reader is installed, scan the bar code now, and the ID will appear
beneath the color measurement.
10.
User options are shown on the keypad map at the bottom of the screen. Press
SAVE/PRINT (down arrow) to both save the reading (if AutoSave is not enabled) in
the ColorFlex EZ Citrus ’s memory and print the reading if a USB printer is connected.
11.
The saved readings counter in the upper left corner of the screen will be
incremented to reflect the newly saved reading.
12.
Remove the sample tube and place the next sample at the port.
13.
Press READ to take another reading using this product setup.