HunterDouglas Pirouette EasyRise, Установка Эксплуатация Уход

Страница: 7 / 24

INSTALLATION
5
■ ■
Mark the location of the screw holes.
■ ➤
The minimum depth required for mounting is 1".
■ ➤
The fully recessed mounting depth is 3
3
⁄
4
" .
■ ➤
If using the optional back cover, an additional
1
⁄
4
"
mounting depth is required.
IMPORTANT: The front edges of the installation
brackets must be level and aligned to each other.
WARNING: Failure to properly align the
brackets could result in the headrail releasing
from the brackets.
■ ■
Use a level to check that the mounting surface is level.
Shim the brackets, if necessary.
■ ■
Drill the screw holes using a
3
⁄
32
" drill bit.
CAUTION: Use drywall anchors when mounting into
drywall.
■ ■
Attach the installation brackets using the screws provided.
IMPORTANT: Do not overtighten the screws. Check to
ensure the lever can be moved easily side to side. If not,
loosen the screws
in one-eighth turn increments until the
lever can be moved easily.
Install the Optional Back Cover
■ ■
Install the cover into the back cover brackets.
■ ■
If necessary, trim the back cover to the desired width.
Proceed to “Install the Shading” on page 9.
2"
Casement
Depth
Back
Cover