HunterDouglas Pirouette EasyRise Скачать руководство пользователя страница 22

Страница: 22 / 24

CHILD SAFETY

WARNING

NOTE:

The warning labels on the bottom rails of corded window coverings contain

important safety information. These warning labels are designed to be permanent, in
accordance with the industry’s safety standards, and must not be removed.

■

Window Blind Cord Can STRANGLE Your Child.

■

Children can climb furniture to reach cords. Move crib and furniture away.

■

Keep all cords out of children’s reach.

Cord Loop Shadings

■

Attach the cord tensioner on the cord loop to the wall or

window casement. See “Attach the Universal Cord Tensioner

(UCT) — EasyRise

™

Only” on page 10. This can prevent

children from pulling cord loops around their necks.

■

Hunter Douglas provides a cord tensioner installation kit

with instructions for attaching the cord tensioner. For the

shading to operate properly, the cord tensioner must be

correctly mounted and secured.

■

Fasteners provided in the cord tensioner installation kit may

not be appropriate for all mounting surfaces. Use appropriate

anchors for the mounting surface conditions.

■

Only Hunter Douglas supplied cord tensioners and hardware

should be used. Replacement parts may be obtained by

contacting Hunter Douglas Consumer Support at

1-888-501-8364.

Содержание Pirouette EasyRise

























Результаты поиска

Содержание Pirouette EasyRise

Отзывы:

Похожие инструкции для Pirouette EasyRise

Бренды по названию

Популярные бренды

HunterDouglas Pirouette EasyRise, Установка Эксплуатация Уход

Результаты поиска

Содержание Pirouette EasyRise

Отзывы:

Похожие инструкции для Pirouette EasyRise

Бренды по названию

Популярные бренды