HunterDouglas Pirouette EasyRise, Установка Эксплуатация Уход

Страница: 20 / 24

CARE
18
Removing the Shading
■ ■
Fully raise the shading.
■ ■
Move each lever of the installation brackets to the
left to release the shading.
■ ➤
A flat blade screwdriver can be used to move
the lever.
CAUTION: Be very careful not to tear or
damage any of the fabric.
■ ➤
If the lever is inaccessible or
inoperable, lower the shading
until you can see the underside
of the bracket. Carefully reach
a small flat blade screwdriver
behind the shading to the tab on
bottom of the bracket between
the screw holes.
■ ➤
Push the tab away from the
shading and pull the headrail to
release it from the bracket.
■ ■
Carefully pull the shading to remove
it from the brackets.
Cleaning Procedures
Pirouette
®
Window Shadings are made of 100% polyester, which means they are inherently
durable and resilient. However, care must be taken to avoid wrinkling the fabric, particularly
where the vanes meet the sheer backing fabric.
CAUTION: Do not steam Pirouette fabrics.
Fabric-Covered Headrail
■ ■
Lightly dust with a clean, dry cloth, vacuum using low suction, or spot clean with a damp
cloth and mild detergent.
Dusting
■ ■
Regular light dusting with a feather duster is all the cleaning needed in most
circumstances.
Vacuuming
■ ■
Use a hand-held vacuum with low suction for more thorough dust removal.
Top View
Move Lever to Left
Tab
Installation Bracket
Underside of
Bracket
End Cap