HunterDouglas Duette PowerView, Установка Эксплуатация Уход

Страница: 13 / 32

INSTALLATION
11
STEP 3: Install the Shade
Mount the Headrail
CAUTION: Be sure no cables are pinched by the brackets
or headrail during installation; damage or overheating of
components could result.
■
Fit the front channel on top of the headrail onto the front lip
of the installation brackets.
■
Push the headrail up and back until it snaps into place.
➤
Check that the bottom of the headrail is snapped into the
base of each bracket.
➤
Check that the front lip of each bracket is in the front
channel of the headrail.
■
If any brackets are not installed correctly, release the shade
and reinstall. See “Removing the Shade, If Necessary” on
page 27.
Proceed to “STEP 4: Connect the Power Source” on page 12.
Good Bad
Back of Headrail
Snaps into Bracket
Front of Bracket
Fits Under Groove
Headrail
Bracket
Snap in
Place
1
2