HunterDouglas Duette PowerView, Установка Эксплуатация Уход

Страница: 11 / 32

INSTALLATION
9
Mount the Installation Brackets — End Mount
End mount the headrail when conventional mounting techniques will not work — for example,
in an arched window opening.
■
Position the end mount brackets so that the top of the attached installation brackets are at
the ordered height of the shade.
CAUTION:
Both brackets must be installed at the same depth and height.
■
Mark both screw holes for each end mount
bracket.
➤
The mounting surface must be vertical
and flat, not part of an arched curve.
IMPORTANT: Add
1
⁄
2
" to the following
minimum mounting depths if a battery
wand is used.
➤
Minimum mounting depth is 1
1
⁄
4
" for
3
⁄
8
"
and
3
⁄
4
" pleat sizes and 2" for the 1
1
⁄
4
"
pleat size. Minimum mounting depth for
a fully recessed end mount is 2
3
⁄
8
" for
3
⁄
8
" and
3
⁄
4
" pleat sizes and 3" for the 1
1
⁄
4
"
pleat size.
■
Drill the screw holes using a
3
⁄
32
" drill bit.
■
Attach the end mount installation brackets using the
flat head screws provided.
CAUTION: Drywall mounting is not recommended.
IMPORTANT: For instructions on installing an
arch over a rectangular shade, see the Installation,
Operation, and Care instructions that came with your
arch shade.
Proceed to “STEP 2: Mount the Battery Wand” on page 10.
1
1
∕
4
"
Minimum
Ordered
Shade
Height