INSTALLATION
5
Mount the Cassette Installation Brackets — Inside Mount
Installation Brackets for Cassette Shades.
The number of installation brackets required
varies depending on the shade width, as shown in the table.
■
Mark 2½" in from each jamb for bracket location.
➤
If more than two installation brackets came with your order, space additional bracket(s)
evenly between the two end brackets and mark their location. Mount into wood
whenever possible.
■
Center the brackets on your marks and mark the screw holes.
➤
The minimum depth required for mounting is 2¼". Fully
recessed mounting requires 4¼" for the cassette to be flush
with the front of the window opening.
IMPORTANT:
The front edges of the installation brackets
must be level and aligned to each other.
■
Drill the screw holes with a
3
∕
32
" drill bit.
IMPORTANT:
Do not mount into drywall. Only mount
into wood.
■
Use a level to check that the mounting surface is level. Shim the brackets if necessary.
Shims are not provided.
■
Attach the installation brackets using the screws provided.
Proceed to “Install the Cables” on page 7.
Cassette
Installation
Bracket
Cassette Shade
Shade
Width
Brackets
Required
Up to 36"
2
36
1
/
8
" – 72"
3
72
1
/
8
" – 90"
4
90
1
/
8
" – 120"
5
Installation Brackets
Jamb
Jamb
Space Evenly
Space Evenly
2½"
2½"
2½"
Inside Mount
