INSTALLATION
11
■
Pull the cable taut and tightening the set screw
with the Allen wrench provided.
■
If the cable is long, wrap the cable with electrical
tape where you intend to cut it. A ½" of cable can
be left past the clamp for future adjustments. If
the cable is left too long, the cover will not snap
into place.
■
Slide the hold-down cover over the bracket with the cable in the
top slot. Push the cover down to snap into place. You may need
to spread the cover apart to snap it into place.
Attach the Universal Cord Tensioner (UCT)
Before doing anything, you
must
first slide the cord tensioner to the bottom of the beaded
cord loop.
■
Insert a small screwdriver, punch, or awl through the screw hole at the bottom of the cord
tensioner.
■
While holding the cord tensioner, move screw hole all the way down to the bottom of the
cord tensioner to release the safety mechanism.
■
Slide the cord tensioner down to the bottom of the beaded cord loop.
WARNING:
It is imperative that the cord
tensioner be properly secured to the wall
or window frame to reduce children’s
access to the cord loop. Young children
can strangle in cord loops. They can
also wrap cords around their necks and
strangle.
CAUTION: The shade will not operate properly
unless the cord tensioner is secured. A cord
tensioner installation kit has been included with
your shade. Follow the instructions in the kit to
correctly secure the cord tensioner.
Pull
Cable
Turn to
Tighten
Spread
Bottom
Universal
Cord
Tensioner
