background image

CARE

19

Cleaning Procedures

Like any fine furnishings, Hunter Douglas Natural Elements

 and Reveal

®

 with MagnaView

®

 

blinds should be cleaned regularly to keep them looking new.

Natural Elements and Reveal with MagnaView Blinds

 

Dust regularly. Use a soft, clean cloth, chemically-treated dust cloth or dusting mitt. Lower 
the blind to its full length, tilt the slats almost all the way down and dust. Then tilt the slats 
almost all the way up and dust. (Not closing the slats all the way allows dusting where the 
slats overlap.)

 

Blinds may also be vacuumed. Use the brush attachment and tilt the slats up and down as 
described above for dusting.

 

Another way to clean blinds is simply by wiping them with a soft, damp cloth.

 

Wash the slats only using a non-abrasive, mild detergent solution. Allow blinds to air dry to 
preserve the dust repellent properties of the slats.

 

For a more thorough cleaning, metal bottom rails and slats may be immersed in a bathtub. 
Do not immerse headrails or wood bottom rails. Bathtub cleaning is not recommended for 
blinds with decorative tapes.

Natural Elements Blinds Only

 

The stained wood components of Natural Elements blinds, like wood furniture, should be 
treated periodically with lemon oil or other wood preservative to protect their finish and 
enhance their luster.

Important:  

Hunter Douglas does not recommend ultrasonic cleaning of MagnaView blinds.

A Note About Wood Products

The bottom rail and valance of Natural Elements blinds are true wood products, made from 
100% hardwood. There will be variations in color, grain, and texture that are characteristic of all 
woods. These variations will be especially visible in blinds with light color stains. The variations 
are normal and are considered acceptable quality. 

Содержание 2" Horizontal Aluminum Blinds

























Отзывы: